Sony ILCE-6500 Manual page 380

MENU →
1
Menu item details
TC/UB Disp. Setting:
Sets the display for the counter, time code, and user bit.
TC Preset:
Sets the time code.
UB Preset:
Sets the user bit.
TC Format:
Sets the recording method for the time code. (Only when [NTSC/PAL Selector] is set to NTSC.)
TC Run:
Sets the count up format for the time code.
TC Make:
Sets the recording format for the time code on the recording medium.
UB Time Rec:
Sets whether or not to record the time as a user bit.
How to set the time code (TC Preset)
MENU → (Setup) → [TC/UB Settings] → [TC Preset].
1.
2. Turn the control wheel and select the first two digits.
The time code can be set between the following range.
When [60i] is selected: 00:00:00:00 to 23:59:59:29
When [24p] is selected, you can select the last two digits of the time code in multiples of four from 0 to 23
*
frames.
When [50i] is selected: 00:00:00:00 to 23:59:59:24
3. Set the other digits following the same procedure as in step 2, then press in the center of the
control wheel.
How to reset the time code
MENU → (Setup) → [TC/UB Settings] → [TC Preset].
1.
2. Press the (Delete) button to reset the time code (00:00:00:00).
You can also reset the time code (00:00:00:00) using the RMT-VP1K remote commander (sold
separately).
How to set the user bit (UB Preset)
MENU → (Setup) → [TC/UB Settings] → [UB Preset].
1.
2.
Turn the control wheel and select the first two digits.
3.
Set the other digits following the same procedure as in step 2, then press in the center of the
control wheel.
How to reset the user bit
MENU → (Setup) → [TC/UB Settings] → [UB Preset].
1.
(Setup) → [TC/UB Settings] → setting value you want to change.