Tail Lights - Vauxhall Crossland X 2020 Owner's Manual

186 Vehicle care
2. Disengage the bulb socket from
the plug connector by pressing
the retaining lug.
3. Remove and replace the bulb
socket with bulb and attach the
plug connector.
4. Insert the bulb socket into the
reflector housing by turning
clockwise and engage.

Tail lights

Depending on version, tail lights and
brake lights are designed as LEDs. In
case of defective LEDs, have them
replaced by a workshop.
Light assembly in the body
Detaching the light assembly
1. Unscrew the two screws that
secure the light assembly.
2. Remove the light assembly by
pulling it straight back.
3. Remove the bulb socket.
a) Version without LED:
Remove the three screws and
take out.
b) Version with LED: