Tail lights
Depending on version, tail lights and
brake lights are designed as LEDs. In
case of failure, have LEDs replaced
by a workshop.
Light assembly in the body
Detaching the light assembly
1. Unscrew the two screws that
secure the light assembly.
2. Remove the light assembly by
pulling it straight back.
3. Remove the three screws that
secure the bulb carrier.
Vehicle care
4. Version without LED
Remove the bulb by pulling and
replace.
Tail light / Brake light (1)
Turn light (2)
Version with LED
Only turn light bulb can be
replaced.
197