Onboard Device Configuration - Alienware MJ-12 X2 User Manual

Hotplug USB FDD Support
Creates a dummy FDD device at bootup that will be associated with a FDD that is hot-
plugged later. When set to Auto, the dummy FDD will be created only if there is no USB
FDD present.
[Options are: 'Enabled', 'Disabled' and 'Auto']

3.2.11 Onboard Device Configuration

Onboard Sil3114 Controller
Enables or disables the Silicon Image RAID controller. When disabled, none of the
SATA devices plugged into ports SATA_3 through SATA_6 will be recognized.
[Options are: 'Enabled' and 'Disabled']
Onboard Sil3114 Mode Setting
Enables or disables the RAID mode on the Silicon Image RAID controller.
[Options are: 'Enabled' and 'Disabled']
Onboard GigaLan Controller
Enables or disables the onboard LAN port.
[Options are: 'Enabled' and 'Disabled']
Onboard1394 Controller
Enables or disables the onboard 1394 controller.
[Options are: 'Enabled' and 'Disabled']
Onboard NEC USB2.0 Controller
Enables or disables the onboard USB 2.0 controller.
[Options are: 'Enabled' and 'Disabled']
30