Setting The Effects Level - Alesis QuadraSynth Reference Manual

Your First Session with the QuadraSynth

Setting the Effects Level

Each Program can use up to four sounds, for either layering or splitting the
keyboard. Each of these sounds has its own effects , as well as effects bus assignment.
Many of the Programs in the QuadraSynth use only one or two sound layers, while
others may use all four sounds. You can adjust the effect send amount for each sound
independently, or you can view/edit all four sounds simultaneously.
While still in Program Edit mode, press the FUNCTION [¬] button six times
(from the ÒEFFECTÓ Function), or until the words ÒEFFECT - LEVELÓ are
underlined in the display.
This is where you determine how much level will be sent from the current Program
sound layer to the effects processor, and on which of the four busses.
MIDI
1
CHAN
EDITING:
PITCH FILTER
PLFO FLFO
PAGE: 1
Turn Quad Knob [1] to adjust the effect send level of the selected sound (1Ñ4).
For the most dramatic effect, set this to 99.
Press the [EDIT 1] button to select another sound to adjust.
The display will indicate ÒSOUND 1Ó or ÒSOUND 2,Ó etc., to indicate which of the
four sounds is being edited.
Press the [EDIT 4] button to display the effect send levels of all four sounds
simultaneously; use Quad Knobs [1] Ñ [4] to adjust each soundÕs effect level.
The display will indicate ÒSOUND 1 2 3 4.Ó
MIDI
1
CHAN
EDITING:
PITCH FILTER
PLFO FLFO
PAGE: 1 2
Note: If a sound is not enabled in a Program, its title will be shown in lowercase (Òsnd4Ó),
and turning that control will have no effect on the sound until the sound is enabled. To enable
a sound, hold down its respective Quad Button (i.e., [3] for Sound #3) and press VALUE
[-].
20
PROG EFFECT
PRESET PRESET
PROGRAM SOUND 1
ASSIGN – VOICE LEVEL EFFECT–LEVEL
AMP RANGE MOD EFFECT
ALFO PENV FENV AENV
MISC.
PROG EFFECT
PRESET PRESET
PROGRAM SOUND 1 2 3 4
ASSIGN – VOICE LEVEL EFFECT–LEVEL
AMP RANGE MOD EFFECT
ALFO PENV FENV AENV
MISC.
EFFECT LEVEL: 99
LEVEL
NAME
TRACK
EFFECT LEVEL: 99
SND1 SND2 SND3 SND4
NAME
TRACK
QuadraSynth Reference Manual
BUSS