Demo Sequence - Alesis NanoBass Reference Manual

Demo Sequence

Built into your NanoBass is a musical demo showcasing seven of the unit's 256
programs, one after the other.
To run it:
1) Make sure your audio is hooked up and the power on.
2) Set the CHANNEL, CATEGORY, and PROGRAM knobs straight up,
to the "twelve o'clock" position.
3) Set the EFFECTS knob all the way counter-clockwise. Then...
4) Turn EFFECTS all the way to the right in one quick turn.
At this point the MIDI indicator LED will turn on, and you will hear Dave Bryce
and Taiho Yamada wig out on bass. (The reason the indicator light is flashing is
because the demo is playing from MIDI data stored in the NanoBass ROM.)
To shut the demo off, either turn the EFFECTS knob all the way to the left again
in one quick turn, or turn the unit's power off.
Having an on-board sequence like this is useful because it allows you to check
your NanoBass at any time in order to make sure it's working, and to help set
audio levels during soundchecks or recording sessions.
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––
20 NanoBass Reference Manual