Miele F 2462 SF Operating And Installation Instructions page 65

– Adjusting the duration of the Auto-
Close function
You can also adjust the duration for
how long the appliance door will remain
open until it closes automatically.
 In Settings mode , use the  and
 sensor controls to select
sistant and select OK to confirm your
selection.
 In Settings mode , use the  and
 sensor controls to select
and select OK to confirm your selec-
tion.
 Use the  and  sensor controls to
select the duration (5 to 30 seconds)
and touch OK to confirm your selec-
tion.
To protect against inadvertent open-
ing: if you do not pull the appliance
door open, it will close again by itself
after a duration defined by you.
Switching on Pull2Open
 In Settings mode , use the  and
 sensor controls to select
and select OK to confirm your
sistant
selection.
 Use the  and  sensor controls to
select Mode and select OK to confirm
your selection.
 Use the  and  sensor controls to
select
Pull2Open
confirm your selection.
 Touch the  sensor control to return
to the previous menu level.
Door As-
AutoClose
Door As-
and select OK to
Selecting additional settings
– Adjusting the intensity
You can also adjust the intensity of the
function. The lower the set in-
Pull2Open
tensity, the less force required when
you pull the appliance door.
 In Settings mode , use the  and
 sensor controls to select
sistant and select OK to confirm your
selection.
 In Settings mode , use the  and
 sensor controls to select
and select OK to confirm your selec-
tion.
 Use the  and  sensor controls to
select the right intensity (
) and select OK to confirm your
High
selection.
Door As-
Intensity
Low , Medium ,
65