Miele F 2462 SF Operating And Installation Instructions page 29


Risk of damage and injury due to
the refrigeration appliance tipping
over.
If the anti-tip brackets are fixed too
high up, they cannot be used to se-
cure the refrigeration appliance.
The distance between the
anti-tip brackets and the refrigeration
appliance must not exceed
5/16" (8 mm).
 Make sure that the gap between the
refrigeration appliance's rear wall and
the installation niche does not exceed
2" (51 mm).
 Place a wooden wedge behind the
anti-tip brackets  if necessary.
 While holding the anti-tip brackets in
place, mark the necessary drill holes
on the rear wall of the installation
niche.
2
2
Retaining screws for different uses
and types of material are supplied in
the accompanying pack.
Securing to a concrete wall
Securing to a wooden wall
Installation
2
2
29