Connecting To The Inserts On An Instrument Amplifier - Alesis ModFX Bitrman Reference Manual

Connecting to the inserts on an instrument
amplifier:
The insert send on a guitar or bass amp is usually labeled "effects
send and return" or "insert send and return". This allows you
to preamplify your instrument before processing it and sending
it to the power amp.
Most guitar amps are single channel, so connect a single insert
cable from the amp to the [L/MONO INPUT] and [LEFT
OUTPUT] of the Bitrman. Some amps have separate "effect
send" and "effect return" jacks; for these, use standard cables.
Check the manual of your amplifier for details.
If you are using a dedicated rack-mount preamplifier, another
method would be to insert the Bitrman between the preamp and
the input(s) of the power amp.
Connections
N e v e r c o nn e c t t he
Bit r m a n be t w e e n t he
p ow e r a m p an d t he
s pe a k e r !
The h ig h p owe r le ve ls cr e ated
b y th e p ower am p will
d es tr oy th e c ir cu itr y of th e
Bitrm an .
2
21