Table of Contents
Advertisement
11
12
13
11. Sleep Data
Turn the SmartDial to the Sleep Data setting
Alternatively, press and hold the SmartDial for 7 seconds. Turn the
SmartDial to either the Centers for Medicare and Medicaid (CMS) Report
(US specific) or Patient Report
Turn the SmartDial to scroll through each of the following statistics:
• Total Compliant Hours
• Average Compliant Hours over the last 30 nights
SmartDial to access the average for the last 7 nights and again for the
last night.
• Percentage of nights used greater than 4 hours over the last 30 nights
. Press the SmartDial to access the percentage for the last
7 nights.
• The number of nights elapsed since therapy commenced .
• Check Sum .
• AHI for last 30, 7, and 1 nights.
• Leak for last 30, 7, and 1 nights.
• 90
percentile pressure for last 30, 7, and 1 nights.
th
• SensAwake for last 30, 7, and 1 nights.
• Exit the Sleep Data setting.
NOTE: A
symbol will appear on the Home Screen when the sleep data
is within the compliance requirements. Once CMS requirements have
been met, the data within the CMS sub-menu will stop logging.
• Exit the Sleep Data setting.
12. SensAwake On/Off
The SensAwake setting is available on both Auto and Premo models,
but may be restricted by your healthcare provider. To adjust, turn the
SmartDial to the SensAwake setting
SmartDial to select On
NOTE: This setting is not available with the Novo model.
13. User Preferences
Turn the SmartDial to the User Preferences
A - 7
and press to enter.
and press to enter.
.
and press to enter. Turn the
or Off
and press again to accept the change.
setting and press to enter.
. Press the
Hide quick links:
Advertisement
Table of Contents
