P12 The Aux Trigger Note Select Function; P13 The Aux Trigger Gain Function - Alesis DM Pro Reference Manual

Triggers
P12 T
HE
(per Drumkit)
This Function allows you to set the MIDI Note Number for the Aux Pedal Input. It is
available only when the Aux Pedal Type is set to
Note that the MIDI Note Number you choose is stored with each Drumkit, not with
one of the four Setups.
To set the Aux Note Value, move the cursor beneath the Value and turn the Value
encoder:
AUX Note:Off
Drumkit
P13 T
HE
(per Setup)
This Function adjusts the level of the incoming trigger signal for the Aux Pedal Input.
It is available only when the Aux Pedal Type is set to
choose for Gain is stored with one of the four Setups, not with each Drumkit.
To set the Aux Trigger Gain Value, move the cursor beneath the Value and turn the
Value encoder:
AUX Trig Gain:40
The bottom line of the display is a level indicator that shows the gain of the Trigger
signal. A vertical bar on the bottom line indicates maximum level. In order to get the
most dynamic range out of the Trigger Input, adjust the Gain so that the hardest hits
extend to the vertical bar and the softer hits barely move the meter.
1 1 6
AUX TRIGGER NOTE SELECT F
P12
AUX TRIGGER GAIN F
P13
|
UNCTION
. The default Value is Off.
Switch
UNCTION
. Note that the Value you
Switch
DM P R
RO EFERENCE
M
ANUAL