Alesis DM Pro Basic User's Manual page 12

How to Adjust the Panning of a Drum
P2: Drum Pan
• To adjust the pan position of a Drum assigned to a MIDI Note, move
the cursor beneath the Drum Pan Parameter Value:
• Now turn the Value encoder to change the MIDI Note's pan position.
There are eight possible Values for the Drum Pan Parameter:
<3
<2
<1
<>
1>
2>
3>
PROG
• In the final position,
programmed in Drum Edit Mode determines the Pan position.
Note that MIDI Pan controller has 128 increments (0 - 127) and the DM
Pro only has seven positions. The following chart shows the MIDI-to-
DM Pro value equivalents:
DM Pro Value Pan Position
<3
<2
<1
<>
1>
2>
3>
Remember, if you send MIDI Panning commands to the DM Pro's Basic
MIDI Channel, the pan position of the entire Drumkit will change. For
individual Pan control over certain Drums, use the Drum Channel
Override parameter as discussed on page 7 of the Basic User Guide.
12
Drum Pan: PROG
P2
Note:83 B4
Hard left
Moderately left
Slightly left
Center
Slightly right
Moderately right
Hard right
Pan position determined by the Drum
PROG , the Drum's pan position as it was
Hard left
Moderately left
Slightly left
Center
Slightly right
Moderately right
Hard right
MIDI CC #10 Value
00
21
42
63
84
106
127