Getting Started
1
A Tour of the Rear Panel
Input Level
/
XLR
TRS
Audio Input
Serial Input
(from other
speaker or
computer)
Serial Output
(to another
speaker)
T he rear panel of the ProLinear DSP contains the following:
•
Input Level control—to adjust the strength of the signal coming
into the speaker. This allows all types of audio sources to be
used, from stand-alone CD players to professional mixers.
•
Power switch—turns the ProLinear DSP off or on
•
Female XLR and 1/4" TRS balanced combination
input connector
•
Two Data Link 9-pin RS-232 serial ports:
•
IEC power connector to provide power from a
100-230v, 50-60 Hz A/C power source
One female "in" port for connecting to a
o
PC or another speaker
One male "out" port for connecting two
o
or more ProLinear DSP speakers
IEC Power
Connector
Power Switch
When the speaker is
powered on, there is a delay
of about 4 seconds before
the speaker begins operating
while the unit performs its
initialization and self-test
procedures.
7