Package Contents; Electrical Safety - DeWalt DW754 Instructions Manual

Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
DATE CODE POSITION (FIG. 1)
The Date Code (bb), which also includes the year of
manufacture, is printed into the housing.
Example:
2010 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Grinding wheel
1 Honing wheel
1 Clamping and grinding attachment
1 Plastic bag containing:
2 Spark guard
1 Spanner
1 Set of mounting material
1 Electrical scheme
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. On/off switch
b. Grinding wheel
c. Workpiece support
d. Bracket
e. Honing wheel
f. Spark guard
INTENDED USE
Your D WALT tool grinding and honing machine was
E
developed for sharpening and honing knives, chisels
and other cutting tools. The machine is never to be
used for grinding magnesium tools. The machine is
intended for intermittent use only.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
The grinding and honing machine is a professional
power tool.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.

Electrical Safety

The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated in
E
accordance with EN 61029; therefore no
earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organization.
E
Mains Plug Replacement
(U.K. & Ireland Only)
SINGLE-PHASE ONLY
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live (L) terminal
in the new plug.
• Connect the blue lead to the neutral (N)
terminal.
• Connect the green/yellow lead to the earth (E)
terminal.
WARNING: Follow the fitting
instructions supplied with good quality
plugs. Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved
3–core extension cable suitable for the power
input of this tool (see technical data). The minimum
conductor size is 1.5 mm 2 ; the maximum length is
30 m.
When using a cable reel, always unwind the cable
completely.
EN G LI SH
27