Akai MPC 5000 Quick Start Manual page 12

7LS
„
This switches to the TRIM mode, where you can edit samples.
You can change the start point by turning the [DATA] wheel, or by moving the Q1 Slider.
Adjust this point so that the first beat of the phrase will be played when you hit the pad. You can check the sound by hitting any pad 1 - 12.
1RWH
You can change the end point by turning the [DATA] wheel, or moving the Q2 Slider.
7LS
1RWH
„
The STEP EDIT page will be displayed as shown.
The LED of the button will be lit – this indicates that you are in STEP EDIT mode.
The event of this pad will be entered at the point of 001.01.000. If you hit a different
pad by mistake, select the erroneous entry and press [F4] (DELETE).
This deactivates STEP EDIT mode.