Network - TP-Link Archer C50 User Manual

Chapter 5
Internet Ethernet1Ethernet2 Ethernet3
Internet Ethernet2
Existing Router
1. Find the router's Internet port, and connect it to the LAN port of your existing router.
Then connect the power adapter and turn on the router.
2. Connect your computer to the router via an Ethernet cable or wirelessly by using the
SSID (network name) and Wireless Password printed on the label at the bottom of the
router. For details, refer to
3. Visit http://tplinkwifi.net, and log in with the password you set for the router.
4. Go to Operation Mode.
5. Select the Access Point
5. 4.

Network

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Network > LAN.
3. Configure the IP parameters of the LAN and click Save.
• LAN Type - Select Smart IP(DHCP) to get IP address from DHCP server, or select
static IP to configure IP address manually.
Ethernet4
Connect Your
mode and click Save.
Configure the Router in Access Point Mode
WAN LAN1 LAN2 LAN3 LAN4
WAN LAN1 LAN2 LAN3 LAN4
New Router
Router.
Devices
72