TP-Link Archer C50 User Manual page 22

Chapter 4
• Username/Password
fields are case-sensitive.
• Confirm Password
password you entered is correct.
• Secondary Connection
an extra connection type, select
connection.
• Connection Mode
• Always On - In this mode, the internet connection will be active all the time.
• Connect on Demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again. If you want to keep
your internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your internet access disconnects.
• Connect Manually
immediately. This mode also supports the
on Demand
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the internet again.
• Authentication Type
Note:
Sometimes the connection cannot be terminated although you have specified the
some applications are visiting the internet continually in the background.
If you want to do some advanced configurations, please click Advanced.
• Service Name/Server Name
configured unless you are sure it is necessary for your ISP. In most cases, leaving
these fields blank will work.
• MTU (Bytes) - The default MTU size is 1480 bytes. It is not recommended that you
change the default MTU size unless required by your ISP.
- Enter the user name and password provided by your ISP. These
- Enter the password provided by your ISP again to ensure the
- It's available only for PPPoE connection. If your ISP provides
Dynamic IP
- In this mode, the internet connection can be terminated
- You can click
mode. The internet connection can be disconnected automatically
- Choose an authentication type.
- The service name and server name should not be
Configure the Router in Wireless Router Mode
or Static IP to activate the secondary
Connect/Disconnect
Max Idle Time
Max Idle Time
to connect/disconnect
function as Connect
Max Idle Time because
17