Card Reader Board - HP EliteBook x360 830 G8 Maintenance And Service Manual

2. Remove the speakers from the computer (2) .
Reverse this procedure to install the speakers.

Card reader board

To remove the card reader board, use this procedure and illustration.
Table 6-13 Card reader board description and part number
Description
Card reader board
Card reader insert (included in Plastics Kit)
Card reader board cable (included in Cable Kit)
Before removing the card reader board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
4. Remove the left speaker (see
5. Remove the system board (see
Remove the card reader board:
1. Remove the three Phillips M2.0 × 2.0 screws (1) that secure the card reader to the computer.
2. Lift the top of the board up to about a 45° angle (2).
(Preparation for disassembly on page
(Bottom cover on page
Battery on page 38).
Speakers on page 54).
System board on page
30).
51).
Component replacement procedures
Spare part number
M03883-001
M46068-001
M03867-001
30).
55