Touchpad - HP EliteBook x360 830 G8 Maintenance And Service Manual

2. Remove the battery from the computer (2).
Reverse this procedure to install the RTC battery.

Touchpad

To remove the touchpad, use this procedure and illustration.
Table 6-6 Touchpad description and part number
Description
Touchpad (models without NFC)
Touchpad (models with NFC)
Touchpad cable (included in Cable Kit)
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
Remove the touchpad:
1. Disconnect the cable from the ZIF connector on the touchpad (1).
2. Disconnect the cable from the reverse ZIF connector on the NFC module (2).
3. Remove the six Phillips M1.6 × 1.8 screws (3) that secure the touchpad to the computer.
(Preparation for disassembly on page
(Bottom cover on page
Battery on page 38).
30).
Component replacement procedures
Spare part number
M46069-001
M46070-001
M03867-001
30).
45