Table of Contents
Advertisement
MAINTENANCE
Exhaust System
Spark Arrestor Screen
Level 2.
Parts Required:
1.
Remove spark plug lead and engine cover.
2.
Place piston at Top Dead Center (TDC) to prevent carbon/dirt from
entering cylinder.
3.
Remove spark arrestor screen
cover (C), gaskets (D), (E), and
screen (F), from muffler body.
4.
Clean carbon deposits from
muffler components.
Note: When cleaning carbon
deposit, be careful not to
damage the catalytic
element inside muffler.
5.
Replace screen if it is cracked,
plugged, or has holes burned through.
6.
Assemble components in reverse order.
Exhaust Port Cleaning
Level 2.
Parts Required: As needed: Heat Shield
1.
Remove spark plug lead from spark plug, and remove engine cover.
2.
Place piston at top dead
center. Remove muffler (A)
and heat shield (B).
34
Spark Arrestor Screen, Gasket
GT-225I
D
E
F
B
A
X7732274604
© 04/21 ECHO Incorporated
Advertisement
Table of Contents
