Table of Contents
Advertisement
GT-225I
Lubrication
Level 1.
Parts Required:
1.
Remove shield.
2.
Loosen bearing housing
locating screw (A), at the top of
the housing, loosen mounting
screw (B) and remove gear
case from drive housing.
3.
Pull the flexible drive shaft (C)
from the drive housing, wipe
clean and apply 15 ml (0.5 oz.)
of grease.
4.
Slide the flexible drive shaft
back in the drive housing being
careful not to get dirt on the
flexible drive shaft.
5.
Install the bearing housing and shield.
X7732274604
© 04/21 ECHO Incorporated
Lithium Based Grease.
MAINTENANCE
B
A
C
37
Advertisement
Table of Contents
