Models - Graco XM Series Instructions Manual

Models

XM OEM sprayers are not approved for use in
hazardous locations.
Use the following matrix to define the construction of the sprayer, based on the six characters of the Part Number.
For example, Part XMEA00 represents an XM Plural-Component OEM sprayer (XM); 5200 psi pump set with pump
filters (E); wall power supply that is not approved for hazardous areas (A).
NOTE: To order replacement parts, see the Parts section your XM Plural-Component Sprayer Repair-Parts manual.
The digits in the matrix do not correspond to the Ref. numbers in the Parts drawings and lists.
First and Second
Digits
XM A
(OEM plural
B
component sprayer
E
without a frame)
F
G
H
Lower Models and Corresponding Identification Codes
Code System Pressure
5200 psi (35 MPa, 350 bar)
E
5200 psi (35 MPa, 350 bar)
F
6300 psi (49 MPa, 490 bar)
G
6300 psi (49 MPa, 490 bar)
H
NOTE: See Accessories and Kits, page 25, for a list of available accessories and kits.
313292K
Third Digit
System Choice
(See below for lower models)
Pump Set Pump Filters
no pumps
no pumps

5200 psi
5200 psi

6300 psi
6300 psi
Pump
Filters
Remote
Mix Manifold

A Lower
(see your lower manual)

L250C4
L250C3
 L180C4
L180C3
Fourth Digit
Control Power
Control Box
Wall Power Supply
A
Alternator
D
B Lower
(see your lower manual)
L220C4
L220C3
L145C4
L145C3
Models
Fifth and Sixth
Digits
Always 00
9