Accessories And Kits - Graco XM Series Instructions Manual

Accessories and Kits

Not all accessories and kits are approved for use in
hazardous locations. Refer to the specific accessory
and kit manuals for approval details.
20-Gallon Hopper Kit, 255963
One complete double-wall 20-gallon hopper. See your
Hopper manual for more information.
Hopper Heater Kit (240V), 256257
For heating fluid in a 20-gallon hopper. See your manual
for more information.
T2 Feed Pump Kit, 256275
For supplying viscous material from a 20-gallon hopper
to an XM sprayer. See your Feed Pump manual for
more information.
5:1 Feed Pump Kit, 256255
For supplying viscous materials from a 20-gallon hopper
to an XM sprayer. See your Feed Pump manual for
more information.
7-Gallon Hopper and Bracket Kit, 256260
One 7-gallon hopper and mounting brackets. Mounts to
the side or back of an XM sprayer. See your hopper
installation kit manual for more information.
2:1 Drum Feed Kit, 256232
One T2 pump feed kit and one Twistork agitator kit for
mixing and supplying viscous materials from a with
55-gallon drum to an XM sprayer. See your Feed Pump
and Agitator Kit manual for more information.
5:1 Drum Feed Kit, 256276
One 5:1 pump feed kit and one Twistork agitator kit for
mixing and supplying viscous materials from a with
55-gallon drum to an XM sprayer. See your Feed Pump
and Agitator Kit manual for more information.
Hopper/Hose Heat Circulation Kit, 256273
For circulating heated water through 20-gallon hoppers,
heated hose, and Viscon HP heater. See your Feed
Pump and Agitator Kit manual for more information.
313292K
Desiccant Dryer Kit, 256512
For use with 20-gallon hoppers. See your desiccant
dryer kit manual for more information.
Lower Strainer and Valve Kit, 256653
For straining material from a feed pump to an XM
sprayer fluid inlet. See your Lower Strainer and Valve Kit
manual for more information.
Electric Heated Hose Power Supply Kit,
256876
For monitoring and controlling fluid temperature in
low-voltage heated hoses. See your heated hose
manual for more information.
5000 psi Two-Component Main Heated
Hose Set Kit
Electric heated hose set for adding additional sections.
Part Description
248907 Heated hose set; 1/4 in. ID x 3/8 in. ID; 50 ft.
248908 Heated hose set; 3/8 in. ID x 3/8 in. ID; 50 ft.
10:1 Drum Feed Kit, 256433
For supplying highly viscous material from a 55-gallon
drum to an XM sprayer. See your Feed Pump and
Agitator Kit manual for more information.
Shutoff/Check Valve Kit, 255278
For replacing shutoff valve or check valve. See your
Shutoff Check Valve manual for more information.
Alternator Conversion Kit, 256991
For converting an XM sprayer from wall power supply to
intrinsically safe alternator power supply. See your
Alternator Conversion Kit manual for more information.
Mix Manifold Kit, 255684
See your XM Mix Manifold Kit manual for more
information.
Remote Mix Manifold and Carriage Kit,
256980
For converting to a remote mix manifold kit with a
protective guard. See your XM Mix Manifold Kit manual
for more information.
Accessories and Kits
25