Page 1
2. Insert the RJ9 plug into the socket marked with a "phone" and the RJ45 plug into the base socket of the Jabra GN9350 marked with "AUX". Software setup: In the LCD Display, set the Jabra GN9350 to "DHSG" and press the OK button to confirm the software setting. Base setup: Set the phone setup switch to "A".
Page 2
"answer/end" button" on the headset; by pressing again the call is ended. Phone setup: Important: For equipment software 3.18, the headset operation must be set up additionally on the phone. https://www.jabra.com.au/supportpages/jabra-link-14201-10/14201-10/faq/9c87ed04- Page 2 of 3 1a34-4175-8eb5-2d9c86fc39c4...
Page 3
OpenStage 40: Menu> Audio Accessories> Headset> Cordless OpenStage 60/80: Menu> User> Audio> Settings> Headset> Cordless Important: The dial tone signal in the headset is transmitted only if the standard ringtones are used. No ringtone is transmitted for mp3 ringtones. https://www.jabra.com.au/supportpages/jabra-link-14201-10/14201-10/faq/9c87ed04- Page 3 of 3 1a34-4175-8eb5-2d9c86fc39c4...