Advertisement
Quick Links
I
G
nstallatIon
uIde
3,500 lb Winch Kit
Model 39A70120100
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Form No. 769-13830
(February 7, 2018)
Advertisement
Related Manuals for Cub Cadet 39A70120100
Summary of Contents for Cub Cadet 39A70120100
- Page 1 READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 Form No. 769-13830 (February 7, 2018)
-
Page 2: Important Safe Operation Practices
Important Safe Operation Practices Avoid unintentional starting. Be sure the Never operate winch if the cable shows any equipment is off when not in use. signs of weakening, is knotted or kinked. Stay alert. Watch what you are doing and Winch does not have a locking mechanism. -
Page 3: Contents Of Carton
Lift up slightly and rotate the bumper Contents of Carton forward to allow the hook (a) to clear the bracket to remove the bumper. See Figure 4. Ref. No. Part Qty. 607-05278 Fairlead Bracket 607-05284 Top Winch Mount Bracket 707-06910 Front Winch Mount Bracket 707-06932 Contactor Bracket... - Page 4 Install the top winch mount bracket with Install the winch/fairlead brackets assembly Route the wires for the winch as shown in eight 5/16-18 x .750 screws (a) and 5/16-18 (a) to the top winch mount bracket (b) with Figure 13 through Figure 15. flange lock nuts (b).
- Page 5 Use the template (a) on page below and drill Using two #8-32 x .750 machine screws (a), Install the switch into the dashboard. Push the necessary holes in the flat surface under .194 x .620 x .063 flat washers (b) and #8-32 in until it snaps into place and then connect to the proper plug on the wire harness.
- Page 6 Notes...
- Page 7 CUB CADET LLC -- LIMITED WARRANTY The limited warranty set forth herein is given by Cub Cadet LLC with respect to a new Cub Cadet® product (hereinafter “Product”) purchased and used in the United States and/or Canada to the Initial Purchaser (as defined herein). This limited warranty does not cover Emission Control Systems and is not a Federal Emission Control Warranty Statement, as defined by U.S.
- Page 8 Website at www.cubcadet.ca. This limited product warranty is provided INCLUDING A DEALER OR RETAILER, WITH RESPECT TO ANY, by Cub Cadet LLC and is the only product warranty provided by Cub Cadet LLC PRODUCT SHALL BIND CUB CADET LLC. DURING THE WARRANTY for the Product.