Setting Up Video & Audio - Airlink101 AICN500 User Manual

- HTTP Port: The default HTTP port is 80. Some ISP's have port 80 blocked. If you are having
problems, you can change it to some other port. The suggested port to be used is anything
between 1024 to 65535
Network >> IP Filter
The IP Filter setting allows the administrator of the camera to limit the users within a certain range of IP
addresses to access the camera.
Start/End IP Address
Assign a range of IP addresses that are not allowed to access the camera by entering the Start IP
address and End IP address. When you are finished, click Add to save the range setting. You can
repeat the action to assign multiple ranges for the camera.
For example, when you enter 192.168.0.50 in Start IP Address and 192.168.0.80 in End IP Address,
the users whose IP address located within 192.168.0.50 ~ 192.168.0.80 will not be allowed to access
the camera.
Deny IP List
The list displays the range setting(s) of IP addresses that are not allowed to access the camera. To
clear the setting, select a range of IP addresses from the list and click Delete.
4.4 Setting up Video & Audio
The Video & Audio menu contains three sub-menus that provide the video and audio settings for the
camera.
Video & Audio >> Camera
- 36 -