1. Manuals
  2. Brands
  3. Airlink101 Manuals
  4. Wireless Router
  5. AR410W
  6. Quick installation manual

Airlink101 AR410W Quick Installation Manual

Airlink ar410w: installation guide
Hide thumbs Also See for AR410W:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Model # AR410W

Quick Installation Guide

Ver. 1A

Advertisement

Table of Contents
loading

Related Manuals for Airlink101 AR410W

Summary of Contents for Airlink101 AR410W

  • Page 1: Quick Installation Guide

    Model # AR410W Quick Installation Guide Ver. 1A...

  • Page 2: Connecting The Router

    Section 1 This Quick Installation Guide only provides the basic instructions. For more detailed information, please refer to the user’s manual on the supplied CD. Note: Prior to connecting the router, be sure to power off your computer, DSL/Cable modem, and the router.

  • Page 3: Verify Connection To Router

    Section 2 Verify Connection to Router Step 1 Go to Start, Run, type command (for Windows 95/98/ME) or cmd (for Windows 2000/XP) and click OK. You will see the command prompt as below. Step 2 Type ping 192.168.1.1 and press Enter. You should get four reply responses back. Step 3 If you get Request timed out, or Destination host unreachable, double-check the network cable connection between the computer and the router and try...
  • Page 4 Step 5 Type ipconfig/renew and press Enter. You should get an IP address of 192.168.1.x (where x is a number between 2 - 254). Proceed to Section 3, Configuring the Router. If you don’t get an IP address, reset the router by holding in the reset button at the back of the router for 10 seconds while it is ON and try ipconfig/renew again.

  • Page 5: Configuring The Router

    Step 8 After your IP address is released, click Renew. You should get an IP address of 192.168.1.x (where x is a number between 2 - 254). If you don’t get an IP address, reset the router by holding in the reset button at the back of the router for 10 seconds while it is ON and try Renew again.
  • Page 6 Step 3 Click Next at the router’s Setup Wizard. Note: If you don’t see the Setup Wizard, click on the Step 4 Change the router’s password by removing the bullets and typing in your new password. OR you may keep the current password (admin) and click Next. Step 5 Select your time zone and click Next.
  • Page 7 Step 6 You may change the router’s LAN settings or just click Next to keep the default settings. Step 7 The router will now auto-detect what type of WAN setting your DSL/Cable Modem has. You may follow steps 8a through 8f to configure your WAN type. Note: If you are certain that your WAN type is different from the one detected, you should manually select the proper WAN type to configure.
  • Page 8 Step 8b For Fixed IP address, enter the values provided by your ISP and click Next. Proceed to Step Step 8c For PPPoE to obtain IP automatically, enter the User Name and Password required to get online and click Next. Proceed to Step 9.
  • Page 9 Step 8d For PPPoE with Fixed IP address, enter the User Name and Password required to get online and the IP address provided by your ISP, and click Next. Proceed to Step 9. You may need to include the domain name with your user name. Ex.
  • Page 10 Step 8f For L2TP, enter the values provided by your ISP and click Next. Step 9 Choose to Enable or Disable the wireless function of the router. Click Next to accept the default Wireless Network ID (default) or change the existing name to fit your current wireless network. You may also change the channel number if needed.
  • Page 11 Step 10 Click Restart to apply the settings. Step 11 Click Close and close the web browser.

  • Page 12: Verifying Internet Connection

    Section 4 Verifying Internet Connection Step 1 Login to the router’s configuration page and click on the Step 2 Verify that the status for the WAN connection says Connected. Note: If the status is disconnected, click on DHCP Renew (for Cable Modem), or Connect (for DSL Modem).

  • Page 13: Troubleshooting

    Section 5 For Cable Modem Users Only Step 1 Log into the router’s LAN Setting page and click WAN. Step 2 Click Clone MAC Address, and click Apply. Step 3 Redo the Setup Wizard. Step 4 Verify the Connection Status as described in Section 4. For DSL Users Only Step 1 Go to the router’s Setup Wizard.

  • Page 14: Connecting To The Router Wirelessly

    For Cable Modem and DSL Users Step 1 Power off the Cable/DSL modem, router, and computer and wait for 5 minutes. Step 2 Turn on the Cable/DSL modem and wait for the lights on the modem to settle down. Step 3 Turn on the router and wait for the lights on the router to settle down.

Table of Contents