Advertisement
Command
Select PC
Next lower channel
Next higher channel
Previous PC channel
Reset KVM
Autoscan
Stop Autoscan
Autoscan with
programmable delay
time
1: Press 1 or 2 for the for the channel #
2: x = 0 ~ 9
1 .. 10" ; 2 .. 20" ; 3 .. 30" ; 4 .. 40" ; 5 .. 50"
6 .. 60" ; 7 .. 70" ; 8 .. 80" ; 9 .. 90" ; 0 .. 99"
Copyright ©2006 AirLink101™ All rights reserved. AirLink101, the stylized AirLink101 logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink101. All
other product or service names are the property of their respective holders. AirLink101 products are protected under numerous U.S. and foreign patents and pending applications, mask work rights, and copyrights.
Quick Reference Chart
Hotkeys
1
ScrLk + ScrLk + (channel #)
ScrLk + ScrLk + (up arrow)
ScrLk + ScrLk + (down arrow)
ScrLk + ScrLk + (Backspace)
ScrLk + ScrLk + End
ScrLk + ScrLk + S
Any key on keyboard
2
ScrLk + ScrLk + (x)
Front-Panel Button
Press the push button to
rotate through the channel
Description
Select the active channel
Select the lower channel
Select the higher channel
Reset the KVM Switch
Autoscan through every connected channel
Terminate Autoscan activity
Autoscan with a user-defined delay time
within a range of 5 ~ 99 seconds
Advertisement
