Page 3
Disclaimer of Product & Services The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this manual, from time to time, may not be correct or may be incomplete.
This product should only be operated from the type of power source indicated on the marking label of the AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company.
Page 5
If an extension cord must be used with this unit, make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord rating. 10. Make sure that the total amperes of all the units that are plugged into a single wall outlet do not exceed 15 amperes.
Datavideo office. All non-Datavideo manufactured products (product without Datavideo logo) have only one year warranty from the date of purchase. Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered under warranty.
Drive, Lighting, Camera module, PCIe Card are covered for 1 year. The three-year warranty must be registered on Datavideo's official website or with your local Datavideo office or one of its authorized distributors within 30 days of purchase. Disposal...
Page 8
CE Marking is the symbol as shown on the left of this page. The letters "CE" are the abbreviation of French phrase "Conformité Européene" which literally means "European Conformity". The term initially used was "EC Mark" and it was officially replaced by "CE Marking" in the Directive 93/68/EEC in 1993.
1. Introduction Designed for 4K and 1080p video transmissions, HBT-5 and HBT-6 form an HDBaseT transmitter/receiver set extending transmission distance to 35 meters for 4K video and 60 meters for 1080p video. With the 48V power connected to the HBT-6 HDBaseT receiver, the HBT-6 will thus be able to power its counterpart by Power over Ethernet (PoE).
Note: In addition to HBT-6, you can also deliver video to HBT-11 (35m@4K2K30) and HS- 1600T/HS-1600T MARK II (60m@1080p60) in 4K mode with HBT-5. If you experience any problem while connecting, please contact the local Datavideo sales office or distributors.
Front Panel RS-232/RS-422 Interface (RJ-45) The transmitter box has built-in RS-232/RS-422 control protocols that allow the user to control devices at the transmitter end from the receiver Remote OUT end. Connect external devices via the RS-232 or RS-422 interface (remote OUT port). DIP Switch Use the DIP switch to switch between RS-232 (00) and RS-422 modes (01).
4. RS-232/RS-422 Pinout Information You may connect external devices such as PTZ cameras to the HBT-5 via RS-232 or RS-422 interface. See below for the respective connection wiring schemes. RS-232 HBT-5 Transmitter Box PTZ Camera White/Orange White/Orange Orange Orange White/Green...
Page 17
RS-422 HBT-5 Transmitter Box PTZ Camera White/Orange White/Orange Orange Orange White/Green White/Green Blue Blue White/Blue White/Blue Green Green White/Brown White/Brown Brown Brown Remote OUT Remote IN...
6. Specifications Model Name HBT-5 Product Name HDBaseT Transmitter Box Video/Audio Input HDMI x 1 Video/Audio Output HDBaseT RJ-45 x 1 Power DC 12V HDBaseT Distance 1080p@60 60m (198ft) by CAT6 cable 4K2K@30 35m (114ft) by CAT6 cable Dimensions (LxWxH)
Page 20
Datavideo Technologies Co., Ltd. All rights reserved 2020 Apr-28.2021 Ver: E2...