KitchenAid 5KCF0104 Use And Care Manual page 17

USING AUTOMATIC COOKING MODES
Stew
H M
H M
˚C ˚C
P7:Step 1
˚F ˚F
Quick Stir
Pulse
Press (Start) again. The temp
and time will stop flashing. Once
7
the set temperature is reached, the
time will begin counting down.
Change accessories, if necessary,
9
and add any additional ingredients
for the next step.
Keep Warm
˚C
˚F
Quick Stir
Pulse
A tone will sound at the end
of the next step. Repeat steps
9-10 until all cooking steps are
complete. After the last step, the
11
Cook Processor will automatically
go into Keep Warm mode for
45 minutes. After 45 minutes,
a tone will sound and the Cook
Processor will turn off.
W11501527A_01_EN.indd 17 W11501527A_01_EN.indd 17
S
S
Stew
H M S
˚C
P7
˚F
Quick Stir
Pulse
H M S
Stew
˚C
P7:Step 2
˚F
Quick Stir
Pulse
Once the first step is complete, a
tone will sound and the settings
8
for the next step will blink in the
display.
Stew
H H M M S S
˚C ˚C
P7:Step 2
˚F ˚F
Quick Stir
Pulse
Quick Stir
Pulse
Press (Start). The temp and
10
time will stop flashing, and the
time will begin counting down.
In the event of a power outage, the
welcome screen will be displayed when
power is restored.
Do not eat food from the cook
processor if "KitchenAid Press
Any key to Continue" shows
in the display.
Doing so can result in food
poisoning or sickness.
If a cooking cycle was interrupted, be
sure that food is cooked completely, to
a minimum internal temperature of at
least 74°C (165°F).
H M S
Stew
H M S
˚C
P7
˚F
17
30-12-2020 15:51:36 30-12-2020 15:51:36