Empty The Tank; When The Tank Is Full; Removing And Installing The Tank - Panasonic F-YZJ90H Operating Instructions Manual

Empty the tank

When the tank is filled up fully about 2.9 liters
the unit will automatically stop running.
●
The Full Tank indicator flash
All other indicators ill turn off
●
When an empty tank is returned to the unit
operation ill resume in the same manner
as previous operation
The Full Tank indicator turn off
emoving the tank
1
Slowly pull out the tank
2
emove the tank cap
and pour out the water.
Pull the knob to
remove the tank
cap
mportant
●
Be sure to put on the tank cap before installing the tank. ailure to do so may cause the
water to spill.
●When you remove the tank do not touch any internal parts of the unit Doing so may damage the product
●
e sure to push the tank gently into the unit anging the tank against anything or failing to push it securely
may cause the unit stop operating Full Tank indicator If this happens remove the tank and try pushing it in
gently once again
20

When the tank is full

●
old the unit firmly and pull out
the tank by the handle being
careful not to spill any ater
T
T
1
① old the knob and put the
tank cap to the tank
②A tick sound happened
hen the tank cap is
correctly installed
.
2
O
F ll an indicato
F ll
an
Wate iewe
T
nstalling the tank
Put on the tank
cap securely.
Tank ap
Push the tank
gently all the way in.
Pin
.