Advertisement
Quick Links
Advertisement
Related Manuals for Panasonic F-YAV28H
Summary of Contents for Panasonic F-YAV28H
- Page 1 F-YAV28H Brightness...
- Page 3 YAV28H...
- Page 5 Before using, please remove the cushioning pad under the louvers (otherwose, the airflow will be reduced, resulting in decreased.) Cushioning pad Louver Take out the sticker from the HEPA filter. Write down the beginning date of service on the sticker and attach it to the unit. YAV28H...
- Page 6 (Please peel off the protective) Front Display The water tank may contain water residue at time of Casters without brakes purchase. This is from final (2 at the bottom/front of the main body) product testing at the factory Casters with brakes and is not due to a defect.
- Page 7 Clean,deodorization Humidity Timer button button button (P.16) Auto indicator ECONAVI Air volume (P.10) (P.14) (P.11) (P.10) indicator (P.10) button (P.12) Auto button (P.13) Function selection button (P.10) Auto indicator (P.15) (P.10) (P.13) (P.16) Display screen (P.10~p.13) Front display (P.12) (P.17) (P.16) Unpowered Powered on...
- Page 9 (Displayed on the "Front Display") Front Display If the deodorant filter and HEPA dust filter are not installed on the body, the value detected by the PM2.5 sensor may be inaccurate. PM2.5/PM1.0 The concentration detected by the PM2.5 sensor may be different from the data detected by other devices. The color of PM1.0 changes according to the color currently displayed by the PM2.5 sensor.
- Page 10 If user is not satisfied with the dry condition After completion of laundry drying. [Keep Dry]+ [Normal] indicators OFF, Intelligent dryness monitoring system will come on, and continues automatic operation. The ECONAVI Indicator and Auto stop Indicator lights off and Intelligent dryness monitoring system lights up in this mode.
- Page 11 P.12 P.15 YAV28H...
- Page 12 Front display switching Full Tank Current Full Humidity Tank HEPA Filter Clean HEPA Filter Clean Filter Purifying Alarm Press to Deodorant Press 3 sec. select HEPA Filter Replace HEPA Filter Replace Airflow Timer Deodorant Press 3 sec. Odor Odor Odor Odor Filter Life Filter...
-
Page 13: Auto Mode
Auto mode Auto indicator About Auto mode Intelligently determine the best mode through a variety of smart sensing devices. In Auto mode, when the humidity reaches the set value, and the PM2.5/PM1.0 and odor reach the green level (indicator level 1), after the machine runs for a period of time, Auto mode will Automatically enter standby mode. - Page 14 Purifying...
- Page 15 Below Down Auto Auto Down Auto Below Carpet floor and shoes, etc. Auto According to the actual needs, adjust the machine to an appropriate position so that the air can blow to the place that needs to be dehumidified. YAV28H...
- Page 16 Timer / Sound / Key lock / Brightness setting When the button is pressed in the standby mode (the "timed power on" cannot be set during operation), the LCD display will go on Note 1 . After settings is completed, press the button to finish the “timed power on”...
- Page 17 Hold down the machine body with your thumb and then take out the water tank. water display flash front display panel shows water full. YAV28H...
- Page 19 Folding on both sides Turn the tank handle up and fold both sides of the tank cover. When installing the folding on both sides of the water tank cover, it may sink if the force is too great. YAV28H...
- Page 20 PM2.5(PM1.0) is the cleaning position After cleaning the HEPA filter, press the button for about 3 seconds according to the instructions on the front display, and the warning screen on the front display will be cleared. After replacing the HEPA filter, press the button for about 3 seconds according to the instructions on the front display, and the warning screen on the front display will be cleared.
- Page 21 F-YAV28H 3.5~5.3 5.3~7.5 Friendly reminder : You can remove HEPA filter when in "Laundry mode" (using ECONAVI) so as to shorten laundry time. Please reinstall the HEPA filter after laundry. YAV28H...
- Page 22 Safety protection? (P.8) 7, P.19) Is there a magnet or metal placed above the machine body? Error action Is there any foreign matter, water or dust on the control panel? (P.8)
- Page 23 The PM2.5(PM1.0) detection Is the PM2.5(PM1.0) sensor dirty? (P.20) indicator stays on in “purple” even if the unit operates continuously The air is dirty but the Is the PM2.5(PM1.0) sensor dirty? (P.20) PM2.5(PM1.0) detection When the operation mode and air volume change, the PM2.5(PM1.0) indicator still lights in “green”...
- Page 24 Check the dehumidifiers in use for a long time! When you have these problems, please turn off the power Not running after power-on or a sudden stop when running. to prevent accidents. When the dehumidifier stops running, The power cord was moved, and sometimes the power is the power consumption is about 1 W.
- Page 25 YAV28H...
- Page 26 F - YA V 2 8 H 1.25 2022.10 C8041-3920 2022.10...