What to do if...
Takes long time to
dry clothes in
"Auto stop " mode
Does not dry
Dry
clothes completely
(
clothes
even after Auto stop
mode is finished
function
Operate with loud
noise
The unit has been
knocked over
The louver
flap is detached
●
s cold moist air getting into the room
→Avoid opening and closing the doors/ indo s very often
●
s it an item which is difficult to dry and need to be s uee ed
dry by hands
●Are you using a heater near the unit
→If the temperature near the sensor is high it ill not be able to
accurately udge the drying time
●Does the air flows through all of the clothes
)
Also are the clothes packed close together or piled up
→For clothes that are difficult to get dry try running the dryer in "Auto stop"
mode or " i ont ".
●
Depending on the amount and type of clothes they could be difficult to
get dry
●Try using
ormal or
page 13
→Drying time is longer than Dry lothes
Operation stops automatically and Alert indicator lights up.
1 Disconnect the po er plug and set the unit back upright Wipe a ay
any spilled ater
2 Let the unit stand for half a day or more ithout using it To dry the unit
completely in case any ater has spilled inside
3 Insert the po er plug again and restart the unit
●Install the louver by
attaching the pin into the
○
A .
slot as sho n in
●
Install the flap by
attaching 2 pins to the
e uivalent holes on the
louver
How to use
o Silent mode under Dehumid.
Lo e
Flap
Hole
A
Pin on the nit
Lo e
19
YZJ90H