Mounting The Entrance Station - Aiphone GH-1KD Installation Manual

2
MOUNTING
2-1
1
[2]
[1]
[3]
GF-2B/3B W (mm) W (inch)
x 1
110 4-5/16"
x 2
245 4-5/8"
x 3
380 15"
x 4 515 20-1/4"
x 5
650 25-9/16"
x 6
785 30-7/8"
x 7
920 36-1/4"
x 8
1055 41-9/16"
x 9
1190 46-1/8"
2
[4]
3
5
a
[1]
25mm
(1")
[2]
W
15mm
(1/2")
[1]
25mm 25mm
(1") (1")
W
15mm
(1/2")
4
b
c
d

Mounting the Entrance Station (1)

[1] Back box
[2] Joint pipe
[3] Back box assembly dimensions
[4] Special screwdriver (enclosed with GH-BC)
1. Mounting the back box
• Make a hole for the cable.
200mm
(7-7/8")
• Use the joint pipe to assemble the back box.
• Make sure the back box is mounted level.
• Mount the camera and GH-NS module at eye-level for the
average height of an adult.
44mm
(1-3/4")
Do not mount the back box on a surface that is recessed by 15
mm (1/2") or more from the external surface of the wall.
2. Set up the modules.
• For information on what modules can be used, see full
Installation Manual provided on CD, pg. 10
295mm
(11-5/8")
6 GH-SW modules can be used. If you would like to connect 7
modules or more, please contact Aiphone.
3. Mount each module panel to the front frame.
• Mount the panels from behind the front frame.
44mm
• Insert the notch into the slots on both sides and slide it downward.
(1-3/4")
4. Mount each module to the mounting bracket.
• Set the modules in the mounting bracket until they click in place.
5. Options
a. Rain hood GF-H
b. Surface-mount box GF-202B
c. Hooded surface-mount box GF-HB
d. 80 cm (32") connection cable GF-C
- 8 -