Busadapter Ba Lc/Rj45; Busadapter 2Xrj45Vd Ha - Siemens SIMATIC ET 200SP HA Equipment Manual

Installation

4.8 BusAdapter 2xRJ45VD HA

4.7

BusAdapter BA LC/RJ45

Introduction
Plug Front view
4
You connect the IO device to the PROFINET IO system via BusAdapter BA LC/RJ45.
The node communicates via two ports.
● Port 1 offers the option of connecting an LC connector.
When data is transferred via port 1, it is first sent as a differential signal to the LC transceiver.
It is converted there for optical data transmission and vice versa.
● Port 2 allows the connection of an RJ45 connector.
When data is transmitted via port 2, the differential signals of the IO device are output
electrically isolated via the BusAdapter.
Assembling the cable
● You can information on assembling the RJ45 cables in the section "Pin assignment of the
RJ45 connection plug (Page 31)".
4.8 BusAdapter 2xRJ45VD HA
Note
Information on SIMATIC BusAdapter BA 2xRJ45VD HA (6GK5991-2VA00-8AA2)
You can find technical specifications and additional information about this BusAdapter in the
Internet:
SIMATIC NET; Industrial Ethernet / PROFINET; Passive Network Components
support.industry.siemens.com/cs/ww/en/view/109759611)
24
3
Description
①
LED LK 1 - Status of Ethernet connection port 1
5
②
LED LK 2 - Status of Ethernet connection port 2
You can find information on this in section "Diagnostics via LED
displays (Page 29)".
③
Connection diagram for the PROFINET connectors (view
from below)
● IO port 1 = LC (optical connection)
● IO port 2 = RJ45 (electrical connection)
④
Fixing screw
1
⑤
Tightening torque
2
BusAdapter for Distributed I/O
Equipment Manual, 09/2019, A5E39261458-AB
(https://