Busadapter Ba 2Xlc - Siemens SIMATIC ET 200SP HA Equipment Manual

Installation

4.4 BusAdapter BA 2xLC

4.4 BusAdapter BA 2xLC
Introduction
Plug Front view
4
You connect the IO device to the PROFINET IO system via the BusAdapter BA 2×LC with fiber-
optic cables.
Derating with redundant configuration
If you use the BusAdapter BA 2xLC in a redundant configuration of an ET 200SP HA with 2
interface modules, an additional reduction of the permissible ambient temperature must be
observed (see section "Technical specifications"; "SIMATIC BusAdapter BA 2xLC
(6DL1193-6AG00-0AA0) (Page 37)").
18
3
Description
①
LED LK 1 - Status of Ethernet connection port 1
5
②
LED LK 2 - Status of Ethernet connection port 2
You can find information on this in section "Diagnostics via LED
displays (Page 29)".
③
Connection diagram for the PROFINET connectors (view
from left)
④
Fixing screw
⑤
Tightening torque
1
2
BusAdapter for Distributed I/O
Equipment Manual, 09/2019, A5E39261458-AB