AgfaPhoto Optima 147 User Manual page 84

Problem
Images cannot print from the
connected printer.
Write to memory card is slow
Cannot write to the memory card
Too many movies to process
Exceed maximum folder number in
the memory card
Possible causes
• The camera is not connected to
the printer correctly.
• The printer is not PictBridge
compatible.
• The printer is out of paper or out
of ink.
• The paper is jammed.
• Movie recording is set in an HD
format setting, but memory card is
either not an HD capable memory
card or not formatted properly.
• Memory card is in write-protection
state.
• When shooting or recording,
writeprotection interruption
phenomenon in the memory card
(such as due to too slow storage
etc.) leads that you can not
continue to shoot or record.
• The number of pictures or binders
in the memory card exceeded the
specifications, so the playback of
data folder can not be displayed.
• "Yes" is selected for "File No"
menu in the Menu (see P64 for
detailed instructions)..
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
Solution
• Check the connection between the camera
and printer.
• Use a PictBridge compatible printer.
• Load some paper in the printer.
• Replace the ink cartridge in the printer.
• Remove the jammed paper.
• Ensure the memory card is an SDHC type
card and ensure it has been formatted by
this camera.
• Please replace a memory card.
• Please shoot again.
• Delete needless files.
• Transfer the files in the memory card to
other area.
• Transfer the files in the memory card to
other area.
• Set "No" for "File No".
81 81