™ System x3650 M5 server and is preinstalled with the Nexenta NexentaStor software. For more information about the Lenovo System x3650 M5 servers, refer to the Installation and Service Guide, which is available for download at: http://datacentersupport.lenovo.com PCIe adapters The following figure and table show the PCIe slot position on the rear of the server and the allocation of adapters.
Chapter 2. Configuration After replacing the system board, update the default Vital Product Data (VPD) information and configure the UEFI settings and HBA boot support for the Lenovo Storage DX8200N (5128) storage system. Configuration tools You can use the following configuration tools: •...
Configuring the N2215 and N2226 HBA boot support In a Lenovo Storage DX8200N storage system, one N2215 HBA is connected to the internal OS drives, and at least one N2226 HBA is connected to the external JBOD. The boot priority of the N2215 HBA must be higher than the N2226 HBA to ensure that the system starts correctly.
Page 9
a. Use the up and down arrow keys to select the N2226 HBA, and then press Enter. b. Change Boot Support to Enable OS Only. Repeat steps a and b to configure all of the installed N2226 HBAs. • Change the boot order of N2215 HBA: Chapter 2 Configuration...
Page 10
Use the arrow keys to select the N2215 HBA, and move the cursor to Boot Order. b. Press - and change the value of Boot Order to 0. Lenovo Storage DX8200N Serviceability Guide...
Page 11
3. Press Esc to exit the boot support configuration, and then select Save changes then exit this menu and press Enter. 4. Select Exit the Configuration utility and Reboot and press Enter. The storage system restarts. Chapter 2 Configuration...
Before you perform any maintenance, ensure that at least one system stays active. System board To maintain the system board, do the following: 1. Replace the system board. For instructions on how to replace the system board, refer to the Lenovo System x3650 M5 Installation and Service Guide at: http://datacentersupport.lenovo.com 2.
Example: CLI@nexenta> pool offline poola c1t50000393B8C83E9Cd0 5. Physically replace the failed drive. • To replace the failed drive in the Lenovo Storage DX8200N storage system, refer to the Lenovo System x3650 M5 Installation and Service Guide at: http://datacentersupport.lenovo.com • To replace the failed drive in Lenovo JBOD D1212/D1224/D3284, refer to the Hardware Installation and Maintenance Guide - Lenovo Storage D1212/D1224/D3284 at: http://datacentersupport.lenovo.com...
Updating the firmware To update the firmware, do the following: 1. Download the latest version of the firmware from the Lenovo Support Web site at http://datacentersupport.lenovo.com. 2. Do one of the following: • Use the BoMC to create bootable media that is suitable for applying firmware updates. For instructions on how to use the BoMC to update the firmware, go to: https://support.lenovo.com/us/en/solutions/lnvo-bomc...
Chapter 4. Troubleshooting For detailed information about troubleshooting, see the following sections in the Lenovo System x3650 M5 Installation and Service Guide at: http://datacentersupport.lenovo.com • Chapter 3 “Troubleshooting” • Appendix B “UEFI/POST diagnostic codes” • Appendix C “DSA diagnostic test results”...
If you need help, service, or technical assistance or want more information about Lenovo products, you will find a wide variety of sources available from Lenovo to assist you. For details, see the Lenovo System x3650 M5 Installation and Service Guide at: http://datacentersupport.lenovo.com...