Card; Emory; Inserting The Memory Card - AgfaPhoto DC-1033m User Manual

Agfaphoto dc-1033m: user guide
Hide thumbs Also See for DC-1033m:
Table of Contents

Advertisement

AgfaPhoto DC-1033m
About Battery Type
After replacing the batteries, please check the Battery Type in the setup menu (
page 20).

Inserting the Memory Card

You can use SD/SDHC Card with this digital camera. The memory card slot is located
beneath the battery cover, adjacent to the battery compartment.
1
Open the battery cover.
Slide the battery cover in the
direction indicated by the
arrow.
2
Insert the card.
Insert the card with the label
facing up and the arrow
pointing in.
T
T
i
i
p
p
s
s
To remove the card, gently press on the edge of the card and release it. Pull the
card out and close the battery cover.
3
Close the battery cover.
C
a
u
t
i
o
n
C
a
u
t
i
o
n
It may cause damage to the card if removed while the camera is on.
Do not touch the connection terminals on the back side of the card.
Not all cards may be compatible with your camera. When purchasing a card,
please check the card's specifications and take the camera with you.
About Camera Memory
This camera is equipped with internal memory. If the memory card is not inserted in the
camera, all images and movie clips recorded by the camera will be stored in the internal
memory. If the memory card is inserted, images and movie clips are stored on the
memory card.
6

Advertisement

Table of Contents
loading

Table of Contents