Table of Contents
Advertisement
camera will light up to indicate that the battery is being charged, and will turn off when fully
charged. You can also charge the lithium battery by connecting the camera to AC power if
you have an adapter to which you can connect the USB cable.
SD memory card installation
This camera supports SD memory card up to 32 GB (not included). The internal memory can
only store a few photos for test purposes, these photos will be lost when you turn off your
camera or remove away the battery. It is necessary to insert a SD card into the camera
before using it. Make sure that the SD card is inserted correctly by gently sliding it into the
slot until it clicks into place to confirm that it is locked. To remove the card, simply press it
firmly and the card will eject itself from the slot.
Please refer to the below diagram for correct installation:
Locate the SD memory card slot and insert a SD memory card as above until you hear a
"click" sound indicating you that your SD card is installed. An icon "SD" appears on the LCD
screen.
Install SD memory card
10
Advertisement
Table of Contents
