AgfaPhoto DC-1033m User Manual page 25

AgfaPhoto DC-1033m
Menu Item
USB
Start-up image
Format
LCD Save
Battery Type
Reset All
[Computer] / [Printer]:
Sets the USB mode to connect the camera with a printer or
computer ( page 54).
Sets a recorded image as the start-up image (
To erase all data stored in the memory card if you are using a
card, or all data stored in the internal memory if there is no card
inserted.
A "BUSY...PLEASE WAIT" message displays and the memory
card is starting format.
A "COMPLETED" message displays when finish formatting.
All data will be deleted including protected files. Be sure to
download important files to your computer before formatting.
[Off] / [On]:
Enable the LCD save function to automatically decrease the LCD
brightness to conserve battery power
When the camera is idle for 5 seconds, the LCD darkens.
To ensure the camera displays battery level correctly, set the type
to match the batteries used.
Alkaline / NiMH / Lithium / Qxyride
Resets the entire menu and button operation settings to initial
default.
The following settings do not change after Reset All:
Date & Time setting
Language setting
TV out setting
Battery Type
20
Functions
page 52).