Customer Care; Fcc Compliance And Advisory; Declaration Of Conformity - AgfaPhoto DC-600uw User Manual

AgfaPhoto DC-600uw

14.0 Customer care

More information about the complete AgfaPhoto digital camera product range can be found under
www.plawa.com / www.plawausa.com
Service & Repair (USA/ Canada):
1-866 475 2605
www.plawausa.com
Service & Repair Hotline (EU):
00800 752 921 00 (from a landline only)
Service & Support Hotline (Germany):
0900 1000 042 (1.49 Euro/ min. from a German landline only)
Online Service / International contact:
support-apdc@plawa.com
To return a product, you will need an RMA number which must be clearly visible on the returned shipment. You
can find further information on the return of goods either by phoning our Support Hotlines or via the plawa
website under the Menu item "Service & Support".
Manufactured by
plawa-feinwerktechnik GmbH & Co. KG
Bleichereistraße 18
73066 Uhingen
Germany
AgfaPhoto is used under license of Agfa-Gevaert NV & Co. KG or Agfa-Gevaert NV. Neither Agfa-Gevaert NV & Co. KG
nor Agfa-Gevaert NV manufacture this product or provide any product warranty or support. For service, support and
warranty information, contact the distributor or manufacturer. All other brands and product names are registered
trademarks of their respective owners. Product design and technical features can be changed without notice. Contact:
AgfaPhoto Holding GmbH, www.agfaphoto.com
14.1 Disposal of Waste Equipment by Users in Private
Households in the
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other
household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated
collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of
your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a
mannerthat protects human health and the environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household waste disposal service or the shop where
you purchased the product.

14.2 FCC Compliance and Advisory

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.) this device
may not cause harmful interference, and 2.) this device must accept any interference received, including interference
that may cause unsatisfactory operation. This equipment has been tested and found to comply with the limits for a
Class B peripheral, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communication. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment. When shielded interface cables have been provided with the product or when
specified additional components or accessories have elsewhere been designated to be used with the installation of the
product, they must be used in order to ensure compliance with FCC regulations.

14.3 Declaration of Conformity

We herewith confirm the following designated product: AgfaPhoto digital camera DC-600uw has been tested and found
to comply with the requirements set up in the council directive on the approximation of the law of members' states relating
to the EMC Directive 2004/108/EC. For the evaluation regarding to the electromagnet compatibility, the following
standards were applied:
EN 55022: 2006, Class B ITE
EN 61000-3-2:2006
EN 61000-3-3:1995+A1:2001+A2:2005
EN 55024:1998+A1:2001+A2:2003
IEC 61000-4-2: 2001
IEC 61000-4-3: 2006
IEC 61000-4-4: 2004
IEC 61000-4-5: 2005
IEC 61000-4-6: 2006
IEC 61000-4-8: 2001
IEC 61000-4-11: 2004
The device is marked with CE logo.
European Union
16