Table of Contents
Advertisement
AgfaPhoto DC-600uw
4.2.5.6 Metering
In Program Mode (
), select Metering of Menu Mode.
Metering provides more superior exposure condition and
brighter pictures.
Multi Metering:
Exposure will be evaluated according to the
average of the available light source in the image area. This is
suitable for general use.
Spot Metering:
If the subject is against the light source or has
little contrast, you can use this function to make the subject
brighter.
METERING
MULTI
SPCT
EXIT : OK
MOVE:
4.2.5.7 Shooting
In Program Mode (
), select Shooting of Menu Mode.
1. SINGLE: No continuous shooting.
2. CONTINUOUS: You can have the continuous shooting
function starting by pressing and holding the Shutter Button
and ending by releasing the Shutter Button.
3. AEB (Auto Exposure Bracketing)
Take three pictures in a series in different exposures, short
exposure (-0.5EV), standard exposure (0.0EV) and over
exposure (+0.5EV).
Note:
The continuous shooting function will not be canceled
until " SINGLE" is selected.
Note:
When Continuous shooting or AEB function is
selected, flash will be disabled.
SHOOTING
SINGLE
CONTINUOUS
AEB
EXIT : OK
MOVE:
4.2.5.8 Sharpness
In Program Mode (
), select Sharpness of Menu Mode.
This effect can make the edge of the captured
Soft
image look smoother, which is suitable for
image editing on PC.
This effect can make the edge of the captured
Normal
mage look sharp, which is suitable for printing out.
This effect can make the edges of your captured
Vivid
image look sharper but may result in more image
noise.
SHARPNESS
SOFT
NORMAL
VIVID
EXIT : OK
MOVE:
4.2.5.9 Effect
In Program Mode (
), select Effect of Menu Mode.
NORMAL
NOR
No special effect is added to the picture.
Turn the image into black and white.
B/W
Turn the image into yellowish brown.
SEPIA
Turn the image into negative film
NEGATIVE
effect.
Operation Steps
1.
MENU
2.
or
3.
or
4. MENU/OK
Operation Steps
1.
MENU
2.
or
3.
or
4. OK
Operation Steps
1.
MENU
2.
or
3.
or
4. OK
EFFECT
NORMAL
B/W
SEPIA
NEGATIVE
EXIT : OK
4.2.5.10 Frame
You can select and add a photo frame to the image you
captured.
After using this function, cancel photo frame if you
prefer not to add a photo frame to the next image.
Note:
The photo frame feature cannot be used in
image size of 10m.
FRAME
OFF
ON
EXIT : OK
4.2.5.11 OSD Information
There are 3 options for the OSD information.
1. OFF:
No OSD information is required.
2. BASIC:
Only basic information is required.
3. DETAIL: Detailed information is required.
OSD INFORMATION
OFF
BASIC
DETAIL
EXIT : OK
4.2.5.12 Face Detection
Face Detection allows you to focus on human faces.
It is effective with the camera held horizontally or
vertically.
Face Detection can only be used with still image.
Face Detection is effective within a distance 2.5m.
Subjects not suitable for Face Detection:
1. The face is obscured by glasses, a hat or hair.
2. A person turned sideways, or who has his head
lifted.
3. The subject is too far to be recognized as a face.
Note:
The Face Detection (
displayed on the top of the LCD Monitor.
FACE DETECTION
OFF
ON
EXIT : OK
8
Operation Steps
1.
MENU
2.
or
3.
or
4. OK
MOVE:
Operation Steps
1.
MENU
2.
or
3.
or
4. OK
MOVE:
Operation Steps
1.
MENU
2.
or
3.
or
4. OK
MOVE:
) icon will be
Operation Steps
1.
MENU
2.
or
3.
or
4. OK
MOVE:
Advertisement
Table of Contents
