Summary of Contents for AudioCodes Huddle Room Solution
Page 1
AudioCodes Huddle Room Solution (HRS) Quick Setup Guide 1. Before Setup Congratulations on purchasing the AudioCodes Huddle Room Solution! Make sure you received: AC-HRS IP Phone Power adapter (for both 458 speaker and HRS phone) Cat 5e Ethernet cable ...
Page 2
4. Cabling the Phone Prior to connecting power, refer to the Compliancy and Regulatory Information Warning: document at www.audiocodes.com/library. To cable the phone: See the illustration and instructions below. Connect the phone cord's short, straight end to the handset.
Page 3
Connect the L-shaped end of the splitter power cable to the phone's DC 12V power port and the straight end to the HRS-458 speaker. Connect the two-prong adapter directly to the electrical wall outlet. 5. Connecting Speaker to Phone • [See previous page] Connect speaker 1's USB cable to the phone's USB port 1.
Page 4
Information in this document is believed to be accurate at print time though due to ongoing product improvements, AudioCodes cannot guarantee accuracy after the Date Published nor accept responsibility for errors. Updates can be viewed on AudioCodes’ Web site at www.audiocodes.com/downloads.