Table of Contents
Advertisement
Connecting the lines
Connecting lines
connection terminals:
acceptable cross section (diameter)
max. number of wires per terminal contact
Connect further wires by using auxiliary terminals.
Use only connecting lines made of the same material and with the same diameter within one terminal
contact.
network connection:
patch cable RJ45
Connecting the lines
► Strip the lines.
► Connect the lines (a, b, P, M, V1 and V2) according to the labelling
(1) (ill. 4).
► Fix the lines by using the slot screwdriver (enclosed in the deliv-
ery).
► Connect the RJ45 interface at the FBI6119-0400 and your network
by using a patch cable (2).
Observe the example circuit on page 10.
0.08 ... 0.82 mm
(Ø 0.32 ... 1.0 mm)
2
2 x 0.8 mm, 3 x 0.6 mm
CAT.5e FTP 8-pin
Fig. 4: type label
Fig. 5: Connecting the lines
9
Advertisement
Table of Contents
