Toshiba RAV-RM561FT-EN Owner's Manual page 60

 Setting and releasing the horizontal air flow direction
Menu (1/3)
1.Wind direction
2.Individual louver
3.Louver setting
4.Off reminder timer
5.Schedule timer
Return
Set
To swing louvers horizontally
Wind direction
Return Louver
Swing OFF
*
* When the vertical louver is stopped,
" Swing ON" is displayed.
Swing ON
To stop the louver swing
Wind direction
Return Louver
Swing ON
*
* When the vertical louver is swinging,
" Swing OFF" is displayed.
Swing OFF
117-EN
1
Push the [ MENU] button.
2
∧ ∨
Push the [ ] / [ ] button to select
"1. Wind direction" on the menu screen,
then push the " Set" [ F2]
Set
button.
1
Push the " Swing ON" [ F2]
Swing ON
button on the "Wind direction" screen.
2
Push the [ CANCEL] button.
The screen returns to the menu screen.
1
Push the " Swing OFF" [ F2]
Swing OFF
button on the "Wind direction" screen.
Push the " Swing OFF" [ F2]
Swing OFF
button to stop swinging. The louver stops in the
position where the button is pushed.
2
Push the [ CANCEL] button.
The screen returns to the menu screen.
– 59 –
NOTE
• If pointing louvers downward for cooling, dew may form on the surface of the cabinet or louvers and may drop down.
• If pointing louvers horizontally for heating, the room temperature may be uneven.
• Do not change the louver manually during swing operation. Doing so may cause a trouble of the louver related parts.
To change the louver position, stop an air conditioner and confirm its operation completely stops.
• For group control status, refer to the "Group control".
 Group control
"Swing operation" can be set individually for each unit when the operation is in group control.
Operate the remote controller according to the procedure below before setting each function.
Wind direction
– 1 – 1 – – 1 – 4
1 – 2 – 1 – 5
–
– 1 – 3 ALL
Return
Unit Set
Wind direction
– 1 – 1 – – 1 – 4
1 – 2 – 1 – 5
–
– 1 – 3 ALL
Return
Unit Set
Address is displayed here.
1–1 Wind direction
Return Louver
Swing ON
1
Push the [ MENU] button during
operation.
∧ ∨
Push the [ ] / [ ] button to select
"1. Wind direction" on the menu screen,
then push the " Set" [ F2]
Set
button.
2
Push the " unit" [ F1] button to
Unit
select the unit to set.
The selected unit changes as follows each time
the button is pushed:
1-1 1-2 ALL
3
Push the " Set" [ F2] button.
Set
The setting display for the selected unit
appears.
4
Push the " Swing ON" [ F2]
Swing ON
button on the "Wind direction" screen.
5
Push the [ CANCEL] button.
Pushing the [ CANCEL] button returns to
the previous screen.
• The number (address) of the selected unit appears
on the upper left of the screen, unless "ALL" is
selected for the unit selection.
118-EN