Table of Contents
Advertisement
Figure 63. Installing the M.2 SATA card on the SATA x16 riser
Figure 64. Installing the M.2 SATA card on the SATA x8 mezzanine card
Next steps
1. If removed,
install the expansion card riser
2.
Install the M.2 x16 riser or the M.2 SATA x8 mezzanine
NOTE:
The procedure to install the M.2 SATA x8 mezzanine card is similar to removing a mezzanine card.
3.
Install the sled into the
4. Follow the procedure listed in
70
Installing and removing enclosure components
assembly.
enclosure.
After working inside your
card.
system.
Advertisement
Table of Contents
