Advertisement
Quick Links
Instructions
GLC 2200 Wiring
Connector Kit
Used to interface the GLC2200 Lubrication Controller to pump and pump accessories. For
professional use only.
Not approved for use in explosive atmospheres or hazardous locations.
Kit Nos.:
Single Connector Kit: 24P686
Multiple (5) Connectors Kit: 24P687
Kits are rated IP65.
make
Important Safety Instructions
Read all warnings and instructions in this
manual and the GLC 2200 Lubrication
Controller instruction manual included with your
unit. Save these instructions.
3A2992A
EN
Advertisement
Related Manuals for Graco GLC 2200
Summary of Contents for Graco GLC 2200
- Page 1 Single Connector Kit: 24P686 Multiple (5) Connectors Kit: 24P687 Kits are rated IP65. make Important Safety Instructions Read all warnings and instructions in this manual and the GLC 2200 Lubrication Controller instruction manual included with your unit. Save these instructions.
- Page 2 NOTE: assigned to each component. • A hand crimp tool is available from Graco. Order • There are 10 available PIN locations in the con- part number 16T671. nector. Only use the pin locations necessary for •...
- Page 3 Instructions Component Wiring 1. Before connecting wires to components verify the 4. Using the Wiring Key Table, connect components to Connector end of the cable is NOT plugged into the wires matching each wire color and pin location. GLC2200 controller. Verify all negative and positive wire colors are cor- 2.
- Page 4 Original instructions. This manual contains English. MM 3A2992 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA Copyright 2012, Graco Inc. All Graco manufacturing locations are registered to ISO 9001. www.graco.com...