Hyundai SANTAFE Plug-in hybrid Emergency Response Manual page 17

Emergency procedures
Extrication procedure
When responding to an incident involving a SANTAFE Hybrid, we recommend that the first
responders follow their organization's standard operating procedures for assessing and dealing
with vehicle emergencies. When the first responders cut the vehicle, they should always pay
special attention to airbag system, orange colored high voltage cables and other high voltage
components as below image to avoid damage to parts which may increase the risks of explosion.
Yellow marked zone is Hot stamped steel. So this zone can not be cut with general tools.
Airbag
Belt pre-tensioner
High Voltage Cables
Ultra High Strength Steel
(hot stamped steel)
15