CARE FITNESS CV-375 Manual page 11

.
GB
1
1. LCD
2. Button of Body Fat
3. Button of Pulse Recovery
4. Button of Down
5. Button of Up
6. Button of Mode
7. Button of Start / Stop
8. Connector of Sensor cable
9. Connector of Pulse cable
10. Blue-tooth socket
The things you should know before exercising
A. Input Power
Plug in the adaptor to the equipment then the computer will produce a beep sound and turn on the computer at the
Manual mode.
B. Program select and setting value
1. Use the UP or DOWN keys to select program mode and then press ENTER to confirm your exercise
mode.
2. At the Manual mode, the computer will use the UP or DOWN keys to set up your exercise TIME,
DISTANCE, CALORIES, PULSE.
3. Press the START/STOP key to start exercise.
4. When you reach the target, the computer will produce beep sounds and then stop.
5. If you set up more than one target and you would like to reach next target, press START/STOP key to
keep on exercise.
C. Wake-Up Function
The monitor will entry SLEEP mode (LCD off) when there is no signal input and no key be pressed after 4
minutes. Press the screen to start the monitor.
Functions and Features:
1. TIME: Shows your elapsed workout time in minutes and seconds. Your computer will automatically count up
from 0:00 to 99:59 in one second intervals. You can also program your computer to count down from a set
value by using the UP and DOWN keys. If you continue exercising once the time has reached 0:00, the
computer will begin beeping, and reset itself to the original time set, letting you know your workout is done.
2
5 6 7
3
4
8 9
10